Work Day #2

Here's the report from Ray:

Another good day and progress made.  Dave Mullen, Dave Folk, Clay Robinson
and Ray Graham working.

Continued to sort
Began sanding...good progress...on bonnet, replacement fender, rear 1/2, and
driver side front fender
Dave F. had cut out the driver side outer sill
Straightened some minor body damage to rear passenger side valance edge
Plugged air pump holes engine intake
Continued to use POR 15 neutralizer spray prep on any bare metal and (or)
minor rust spots

Next Tuesday at 9:00...plan to roll the car into driveway to degrease and
power wash engine and engine compartment.

And pictures: